Sheet metal chassis and cabinets are widely used in various fields. Sheet metal chassis and cabinets are made of metal materials and used in a wide range of fields. Because of the metal properties of sheet metal chassis and cabinets, they are also widely used outdoors. The first challenge for outdoor use is the harsh outdoor environment. Therefore, the manufacturer has strict requirements for sheet metal chassis and cabinets.

對于戶外使用的鈑金機箱機柜做工上要求精細，并且在材質上也選用的金屬的材質，因為好的性能才能良好的抗腐蝕性能，所以客戶在選擇鈑金機箱機柜時，對材質要進行了解。鈑金機箱機柜還需要采用靜電噴塑處理，這樣可以的加強外面的抗腐蝕能力，并且噴塑可以的降低吸水性以及透氣性能，機械性能尤其是性能比較優良。

For the sheet metal chassis and cabinets used outdoors, the workmanship is required to be fine, and the metal materials are also selected in terms of materials. Because good performance can have strong corrosion resistance, customers should understand the materials when selecting sheet metal chassis and cabinets. The sheet metal chassis cabinet also needs to be treated with electrostatic plastic spraying, which can strengthen the external corrosion resistance, reduce the water absorption and air permeability, and have excellent mechanical properties, especially the performance.

鈑金機箱機柜油漆涂覆層應考慮貯存、運輸和使用中的惡劣環境條件。油漆涂覆層除應有良好的機械性能還應有良好的抗水，耐化學腐蝕能力，有、耐光照、抗霉菌的性能。

The harsh environmental conditions during storage, transportation and use shall be considered for the paint coating of sheet metal chassis and cabinet. In addition to good mechanical properties, the paint coating shall also have good water resistance, chemical corrosion resistance, light resistance and mold resistance.

機箱機柜采用金屬材質進行加工生產，而金屬材質在工藝過程中，需要注意金屬厚度，要高于處理加工后成型產品的厚度。但是，由于金屬材料都是生產廠家大批量生產的，難免會碰到氧化的材料。對于這樣的材料我們應該做何處理呢

The chassis and cabinet are processed and produced with metal materials. In the process of metal materials, attention should be paid to the metal thickness, which should be higher than the thickness of formed products after processing. However, since metal materials are mass produced by manufacturers, it is inevitable to encounter oxidized materials. What should we do with such materials

有些材質均通過剪板、扎邊、焊接或者是經過人工將其外表進行火烤加溫處理，造成了黑色氧化皮。這種的氧化皮就比較堅固，過去人們通常使用硝酸和氫氟酸進行強力腐蝕的辦法去除。但是這種方法危害大，尤其是對人的身體、周圍環境。其腐蝕性也較大，成本高，現已經被鈑金加工淘汰。

Some materials are treated by cutting boards, binding edges, welding or manual fire baking and heating, resulting in black oxide scale. This kind of oxide skin is relatively strong. In the past, people usually used nitric acid and hydrofluoric acid for strong corrosion to remove it. However, this method does great harm, especially to people's body and surrounding environment. Its corrosivity is also large and its cost is high. Now it has been eliminated by sheet metal processing.

機箱機柜表面氧化有著的處理辦法。一個是噴砂法，選用噴微玻璃珠的辦法，去除外表黑色氧化皮。另一種辦法是運用的酸洗鈍化膏與常溫害附帶無機添加劑的清洗液進行浸泡洗滌。

There are different treatment methods for oxidation on the surface of chassis and cabinet. One is sand blasting, which uses the method of spraying micro glass beads to remove the black oxide skin on the surface. Another method is to soak and wash the pickling passivation paste and the cleaning solution with inorganic additives at room temperature.

如果機箱機柜表面總是附著一層黑色氧化皮很容易給客戶留下一個不好的印象，為了避免這種情況的發生在處理氧化方面要有著好的解決辦法。就現階段而言，我國的五金行業的發展是不規范的，沒有一個核心的發展方向。大部分的五金行業的規模都是比較小，而且生產出來的產品都是比較低端的。在這樣一個充滿競爭的社會環境下，五金行業的發展是比較卑微艱難的。要想得到好的發展，就依靠鈑金加工這種行之的加工技術，不斷提升產品的使用價值。

If a layer of black oxide is always attached to the surface of the chassis and cabinet, it is easy to leave a bad impression on the customer. In order to avoid this situation, there should be a good solution in dealing with oxidation. At this stage, the development of China's hardware industry is not standardized, and there is no core development direction. The scale of most hardware industries is relatively small, and the products produced are relatively low-end. In such a competitive social environment, the development of hardware industry is relatively humble and difficult. In order to get good development, we should rely on the professional processing technology of sheet metal processing to continuously improve the use value of products.

對于鈑金加工業來說，它現在的發展仍舊是不成熟的，有著許多的地方需要改進。不斷加大和創新的力度，實現加工產品使用性能的提升。此外，還要經常像的一些知名學習，培養的科研人員，推進自身加工技術的不斷進步。只有先把加工技術提上去了，才能夠生產出上乘的產品，得到消費者的認可。此外，鈑金加工業要想做大做強，還要打響自身的響應，創建于屬于自己的。要想使自己的被多的人知道，做好宣傳是非常重要的。大力借助互聯網和報紙等廣告平臺，讓自身不斷被打響。并且還要實現經營方式的多元化，不僅可以設立五金店、旗艦店等實體店，還可以在網上進行販賣，不斷擴大經營范圍。

For sheet metal processing industry, its development is still immature, and there are many places to be improved. Continuously strengthen and innovation to improve the service performance of processed products. In addition, we should often learn from some well-known researchers and train them to promote the continuous progress of their own processing technology. Only by first raising the processing technology can we produce high-quality products and get the recognition of consumers. In addition, if the sheet metal processing industry wants to be bigger and stronger, it should also start its own response and create its own. If you want to be known by many people, it is very important to do a good job of publicity. With the help of advertising platforms such as the Internet and newspapers, we have been constantly launched. In addition, we should also realize the diversification of business methods. We can not only set up physical stores such as hardware stores and flagship stores, but also sell online to continuously expand the business scope.