Now the continuous release of commodities can make all kinds of cleaning machines and equipment widely used. For semiconductor components and other vulnerable parts and printed circuit boards with complex surfaces, the surface stains can not be removed. According to the operation of the cleaning machine on the separate processing chip and the basic principle of ultrasonic cleaning, Master the whole operation process of the hanging chain ultrasonic cleaning line, set the technical full-automatic frequency tracking characteristic impedance of ultrasonic cleaning in the control loop, and carry out the design method of the system in detail.

現如今的電鍍行業超聲波清洗機，可以實行全自動頻率追蹤輸出功率調節和同歩，并有二種實際操作方式掃描儀和震蕩，試驗說明清洗機工作中靠譜清洗效果非常的好，根據清洗和診療機不一樣濃度的飽和溶液的多酶清洗設備的清洗機的具體分析中，發覺因而酶的濃度適度的清洗，進而保證清洗器材的品質。

Nowadays, ultrasonic cleaning machines in electroplating industry can implement full-automatic frequency tracking, output power adjustment and synchronization, and there are two practical operation modes: scanner and vibration. The test shows that the cleaning effect of the cleaning machine is very good. According to the specific analysis of the cleaning machine of multi enzyme cleaning equipment with different concentration of saturated solution between the cleaning machine and the diagnosis and treatment machine, It is found that the concentration of enzyme is appropriate for cleaning, so as to ensure the quality of cleaning equipment.

挑選受破壞的機器設備，任意分為3組，運用一個設備超聲波清洗，各自提前準備多種多樣酶的濃度來清洗被破壞的機器設備，應用高倍放大鏡看著查驗、來檢驗實驗棒的清洗、3M為測試設備表面殘余的蛋白，分辨清洗品質雙光透鏡溶清洗液多酶的實驗，濃度的看著定期檢查檢測棒3M清洗的達標率是顯著比基濃度更強，2組中間存有統計學意義。

Select the damaged machinery and equipment and randomly divide them into three groups. Use one equipment for ultrasonic cleaning. Prepare a variety of enzyme concentrations in advance to clean the damaged machinery and equipment. Use a high-power magnifying glass to check the cleaning of the experimental rod. 3M is to test the residual protein on the surface of the equipment and distinguish the cleaning quality. The experiment of multiple enzymes in the cleaning solution of double light lens, The standard rate of 3M cleaning of the detection rod was significantly stronger than the base concentration, and there was statistical significance between the two groups.

電子零件超聲波清洗機，用以清洗環境污染的機器設備，提升清洗實際效果，確保殺菌品質，設計方案了清洗品質、緊湊清洗新式清洗機的金屬材料線框，應用倒絲機設備用以清洗在清洗箱不斷清洗，可提升清洗的時間部分，循環和設定，以保證清洗液的清洗和環境溫度的清洗液的自動控制系統，因而超聲波頻率和輸出功率是依據污染物質的粒度來確認的。

The ultrasonic cleaning machine for electronic parts is used to clean the machinery and equipment polluted by the environment, improve the actual cleaning effect and ensure the sterilization quality. The design scheme has the cleaning quality and compact cleaning of the metal material wireframe of the new cleaning machine. The equipment of wire pouring machine is used to clean the continuous cleaning in the cleaning box, which can improve the cleaning time, cycle and setting, In order to ensure the cleaning of cleaning solution and the automatic control system of cleaning solution of ambient temperature, therefore, the ultrasonic frequency and output power are confirmed according to the particle size of pollutants.